Descripción
DeltalightNICE 2C C
Description
Suspended ceiling fitting. The device meets CE standards and belongs to class II of AREI. Protection
class IP20.
The lighting fitting consists of a cylindrically shaped aluminium base that is attached to the ceiling and
a matt cylinder in acrylic that contains the lamp. The cylinder is suspended directly on to the ceiling
base through the supply cable.
The light is enclosed by another cylinder with a smaller diameter that is inside the other one at right
angles. This gives a playful light effect.
The outer cylinder is attached through 3 cylindrically shaped aluminium screws.
Lightsource
Halogen push lamp on mains voltage: QT14 (25-40-60-75W)
Base: G9
Connection: 230-240 V/50-60 Hz
Fixation
A cylinder-shaped plastic base in which the electrical connection is done is screwed directly on to the
ceiling. The aluminium base is slid over this for the finish.
The outer cylinder must be removed by loosening the 3 aluminium screws to replace the lamp.
Options
- A set of metal disks can be used to enlarge the mounting surface.
The first disk is secured to the ceiling. The second disk is attached to the first together with the device.
Cover plates, round, supplied in 3 different diameters (62 - 90 - 100 mm)
Dimensions
Diameter / height of outermost acrylate cylinder : Ø 200 mm / 300 mm
Diameter / height of ceiling base : Ø 57 mm / 44 mm
Length of pendant cord : 2 m
Weight : 1.1 kg
Dimensiones
