Descripción
DeltalightJETI - LUSTER
Description
Ceiling fitting for general lighting. The device meets the CE-standard and belongs to class I of AREI.
Protection class IP20.
The suspended lamp consists of four sand-blasted polycarbonate cubes mounted on top of each other
separated through a metal ring. The whole is attached to the ceiling through a flat cylindrically shaped
base.
The length of the two steel suspension cables amounts to no more than 3 metres.
Between the ceiling fitting and the lighting fitting itself there is a cylindrically shaped metal tube that
contains the ballast.
Lightsource
Fluorescent lamps: 2 x T16 (54 W)
Base: G5
Including electronic ballast (dimmable or not)
Connection: 230-240 V/50-60 Hz
A pressure switch is used for dimming.
Fixation
A fixation plate is attached to the ceiling.
The flat cylinder-shaped ceiling fitting is used for this, which is also where the electrical connection can
be found.
A transparent and flexible cable leaves from her to the housing of the ballast.
This, next, runs up to all the cubes.
All the cubes can be easily removed by only using socket screws to replace the lamp.
Dimensions
Diameter of ceiling piece : 120 mm
Ballast housing : diameter 45 mm - length 511 mm
Dimensions of the simple cube : 240 x 240 x 280 mm
Overall size height of all cubes : 1210 mm
Weight : 6.5 kg
Dimensiones
