Inicio Lámparas Interior
Apliques
Plafones
Lamparas Colgantes
Lamparas de Sobremesa
Flexos
Lamparas de pie
Aros Empotrables
Ventiladores
Iluminacuadros
Lámparas de Dormitorio
Lámparas de Baño
Lámparas de Cocina
Downlights
Hotel
Lámparas Infantiles
Proyectores
Accesorios Lamparas
Lámparas Exterior
Apliques
Balizas
Colgantes
Downlights
Empotrables de pared
Empotrables Suelo
Farolas
Lamparas de pie
Plafones
Proyectores
Sobremuros
Suelo
Decoración
Accesorios Ventiladores
Butacas
Espejos
Macetas
Mesas
Mobiliario de Decoracion
Sillas
Sofas
Ventiladores
Lámparas Led
Lámparas Led
Apliques Led Interior
Bombillas Led
Empotrables Led Exterior
Empotrables Led Interior
Sobremesas Led
Bombillas
Lamparas Bajo Consumo
Lamparas de Descarga
Lámparas Fluorescentes
Lámparas Halógenas
Lamparas Incandescentes
Lamparas Led
Ofertas

Retro 2 h111 w

Fabricante
Delta Light
Código
202 56 88 02 W
Colección
Retro
Precio
257,20
Precio habitual: 309,89
Ahorras: ( dto.)
IVA incluido
Plazo de entrega
20 - 25 días
Compártelo
Retro 2 h111 w
* Fotografia orientativa no vinculante
¿Tienes dudas? Ponte en contacto AQUI o al 938 030 968 o a info@luz84.com
de lunes a viernes de 9h a 13h y 15h a 19h
Descripción

DeltalightRETRO 2 H111

Description
Recessed lighting fitting with two adjustable spots for downlight. The device meets the CE-standard
and belongs to class I of AREI. Protection class IP20.
The device with a thin rounded trim has the form of a rectangle with half-circular ends. In this ring you
find 2 concentric rings and the inside ring contains the lamp.
Every light can turn 30° in all directions.
The concealed section consists of a closed housing that has the same form as the trim.

Lightsource
Gas discharge tube with ALU-reflector: 2 x HIPAR111 35 W
Base: GX8.5
Including electronic ballast
Connection: 230-240 V/50-60 Hz

Fixation
The device can be mounted using two methods: (1) with the thin, rounded trim on the ceiling or (2)
with the trim recessed in the ceiling:
(1) The device is clamped in the ceiling with attachment plates that can be regulated with regard to
height.
A net to be plastered can be used with an adjusted opening as an option for the above.
(2) Use the optional recess ring with recess brace to ensure that the device is added to the ceiling in a
recessed position. You can slide the device into this ring. The ring with brace should be plastered in
the ceiling.

Materials
steel and aluminium, grey or white varnished
Options
- A putty can be supplied as an option that consists of a net to be plastered with an adjusted opening
for the attachment of the light fitting.
- A putty can also be supplied that consists of a recessed ring to be plastered with an adjusted
opening for a recessed mounting of the device.
For the HIPAR111 light a special colour glass is available which is fastened by an aluminium ring. This
ring slides over the metal anti-glare tube of the light.
Possible colours are blue, red, green or yellow.
- A conical detachable ring can also be mounted on the lamp ring.

Dimensions
Ceiling cut-out : 306 x 163 mm (rounded-off to Ø 163 mm)
Ceiling depth: 210 mm
Ceiling thickness : 20 mm maximum
Visible trim : 312 x 168 mm in overall size. (rounded-off to Ø 165 mm)
Weight : 1.9 kg maximum
Dimensiones
De la misma linia
Retro 1 h111 a
Retro 1 h111 a
155,32
187,14
Retro 1 h111 w
Retro 1 h111 w
155,32
187,14
Retro 1 qr a
Retro 1 qr a
110,84
133,54
Retro 1 qr w
Retro 1 qr w
110,84
133,54
Retro 2 h111 a
Retro 2 h111 a
257,20
309,89
Retro 2 qr a
Retro 2 qr a
182,38
219,74
Retro 2 qr w
Retro 2 qr w
182,38
219,74