Descripción
DeltalightRETRO 1 H111
Description
Recessed lighting fitting with adjustable spot for downlight. The device meets the CE-standard and
belongs to class I of AREI. Protection class IP20.
Round recessed spot with a thin rounded trim. In this ring you find 2 concentric rings and the inside
ring contains the lamp.
The entire device can turn 30° in all directions.
The non-visible part consists of a cylindrical closed housing.
Lightsource
Gas discharge tube with ALU-reflector: HIPAR111 35 W
Fitting: GX8.5
Including electronic ballast
Connection: 230-240 V/50-60 Hz
Fixation
The device can be mounted using two methods: (1) with the thin, rounded trim on the ceiling or (2)
with the trim recessed in the ceiling:
(1) The device is clamped in the ceiling with attachment plates that can be regulated with regard to
height.
A net to be plastered can be used with an adjusted opening as an option for the above.
(2) Use the optional recess ring with recess brace to ensure that the device is added to the ceiling in a
recessed position. You can slide the device into this ring. The ring with brace should be plastered in
the ceiling.
Materials
steel and aluminium, grey or white varnished
Options
- A putty can be supplied as an option that consists of a net to be plastered with an adjusted opening
for the attachment of the light fitting.
- A putty can also be supplied that consists of a recessed ring to be plastered with an adjusted
opening for a recessed mounting of the device.
For the HIPAR111 light a special colour glass is available which is fastened by an aluminium ring. This
ring slides over the metal anti-glare tube of the light.
Possible colours are blue, red, green or yellow.
- A conical detachable ring can also be mounted on the lamp ring.
Dimensions
Ceiling cut-out : Ø 163 mm
Fitting depth : 210 mm
Ceiling thickness : 20 mm maximum
Visible trim : Overall Ø : 168 mm
Weight : 1.1 kg maximum
Dimensiones
